CXP Series High Pressure Triplex Reciprocating Plunger Pumps :
(15 lpm to 115 lpm) (14 bar to 241 bar)
The CXP Series Plunger pump adds a New dimension of rugged versatility to WASP high pressure industrial line. In one basic unit, the CXP offers seven interchangeable plunger and seal packages, allowing complete hydraulic coverage. The CXP handles liguids upto 160 F (71 C) with a maximum inlet pressure of 75 PSI. Optimum flow and pressure is easily converted, even in the field, by changing the plunger and seal kit.
Three different valves with different flow areas (Valves A, B and C) fit in to the same valve deck and are also iterchangeable. The CXP series combines WASP manufacturing expertise and understanding of applications to provide a pump with the strength and versatility for any demanding high pressure job.
FLUID-END COMPONENTS
- Cylinder body of high-strength ductile iron or aluminium-bronze for salt water applications.
- Ceramic plungers (Optional are non-scoring, high alumina ceramic with ground smooth surface of 12 RMS.
- High pressure seals are welted seal design, lubricated and cooled by suction fluid for longer seal life.
- Seal plate of stainless features easy and quick replacement of seals.
- Spring-loaded center post valves have delrin valves and stainless steel seats. Double springs for high speed and longer life.
- Valve caps of stainless steel with Buna-N o-ring seals and back-up ring. Valves can be serviced without disturbing piping.
- Suction and discharge valves are located for easy service, Large threaded suction opening on sides and front. Discharge openings are tapped.
POWER-END COMPONENTS
- Crankcase of rugged cast iron supports the crankshaft and provides as an oil reservoir for continuous splash lubrication. Cover section quickly removable for easy service.
- Automotive type crankshaft is high strength ductile iron.
- Shaft bearings feature roller bearings for high loads.
- Crankshaft journal bearings are automotive type, steel-backed babbit inserts.
- Connecting links are high string ductiole iron with bronze wrist-pin bearings.
- Crossheads are ground and chrome plated to reduce friction and wear in crosshead bores.
- Continuous splash lubrication is provided during either direction of rotation.
- Available configured for hydraulic drive.